Elastic cloth plaster cloth Elastic cloth plaster cloth Elastic cloth stretch film plus ring plaster cloth
Plaster cloth can be added to the film according to customer requirements, which can prevent drug penetration, leakage, and good anti-seepage effect. Various specifications are arbitrarily selected, and special shapes can be customized. According to customer requirements plus round, oval, square impermeable membrane and impervious ring, professional manufacturers long-term production, new and old customers looking to visit the factory Xindi paper; stretch fabric 65G above. Medical pressure sensitive adhesive more than 50g, various grades, existing specifications 6*6 7*7 8*8 9*12 8*10 12*12 15*15 and dozens of specifications, specific specifications can be customized! . Quality is quite competitive in the same industry! The structure of the plaster fabric used to make black plaster, white plaster, and rosin plaster: Spunlace, non-woven fabric, hot melt adhesive, and release paper.
First, the characteristics of medical tape produced by our company
1, adhesive tape viscosity stability
2. There is no solvent residue in the gel body of the adhesive tape, and there is no irritation to the skin.
3. The gel of the tape is in a microporous distribution, and sweat is discharged in time to ensure that the sweat does not fall off.
4. Colloids are evenly coated with strong cohesion and no (or very little) residual glue on the skin.
5, the use of medical pressure-sensitive adhesive imported from Germany, stable performance, skin is not allergic.
Second, after repeated testing by our company, the drugs in topical patches, especially borneol drugs, are prone to react with common pressure-sensitive colloids, resulting in lower adhesive tape viscosity and efficacy. When using adhesive tapes, drugs and colloids should be used for testing. Our medical pressure-sensitive adhesives imported from Germany undergo many long-term fusion experiments with borneol and camphor. They do not react and maintain good viscosity.
Third, a simple test method
1. Stick the tape on the joint site 2 for two days and observe the viscosity.
Test results: Adhesive tape with good adhesiveness is adhered; general tape will gradually detach from the edge and skin.
2. Remove the adhesive tape after peeling and observe the residual amount of skin.
Test results: The tape with good viscosity has less or no residue; the general tape will have a lot of residue.
3, apply the tape for 30 minutes, rinse with a shower, observe the viscosity.
Test results: very few high-quality tapes do not fall off; normal tapes come off when they come in contact with water